Working Of 3D Printer

By Daily Alert

November 3, 2013 Electronics No comments

Literally, a new dimension to printing has been added by the 3D printing. The 3D printer has modernized manufacturing for the starters. A number of technologies are used by 3D Printers. A powerful lesser is used by the Selective Lesser Sintering to merge the plastics, metals, and ceramic as well as glass particles. The materials that remain when the job comes to an end are always being recycled. A thermoplastic such as ABS plastics is melted and then deposited using an extrusion nozzle that has been heated in a fused deposition modeling (FDM).

The first time that the 3D Printer was seen in the market was in the mid-1990s and it is believed that it was during this time that it was invented by Stratasys with assistance from IBM as a number of printers that are always personal, such as both MakerBot and RepRap have been doing.

Working of 3D Printer

Also read: Working of LED TV

Working principles of a 3D printer

An example of an inkjet-like 3D printing system, that drenches a binder that is colored and glue- like onto succeeding layers of powder where you want to form an object, is a Multi-jet modeling. This is one of the methods that are considered to be the fastest and coloring printing can only be supported by one of the few printers.

A standard inkjet can easily be modified to use other materials other than ink. Print heads have been developed by the enterprising do-it-yourselves to allow the printer to use a number of material for printing out heads on the 3 Dimension printer by themselves. The 3D print heads that are capable are sold by some companies such as MicroFab.

A polymer that is in liquid form is exposed to light, by an added technique of 3D printers, from a Digital Light Processing (DLP) projector. The projector makes sure that the polymer layer is hardened to come up with an object. The projector also ensures that liquid polymer that had remained is drained off. Metal powder is then melted layer by layer with the help of an electron beam by the Electron Beam Melting (EBM). Medical implants together with parts of aircraft are always synthesized by titanium.

A nozzle or other devices are used by a lot of techniques to either spray or extrude liquid or liquefy material a platform that has been built where the object is to be created. Even though the nozzle in the 3D printer moves, its platform remains intact, but often the opposite of this has always been the truth. The instructions that are in the CAD files that is the blueprint of the object is used in the process of coming up with an object.

A good number of materials can be used by a 3D printer depending on the technique. These materials are not limited to metal such as solder, aluminum, titanium and other metals alone. But the plastics as well as polymers are also used. The printer can also use ceramics, plaster, glass and foodstuffs such as icing, chocolate and even cheese to come up with an object.

You can also check this video below to get a good idea how 3D printing is done.

So, what do you guys think about this amazing technology? Express your thoughts in the comments below.

Latest Trends:
  • 3d printer
  • principle of working 3d printing
  • working of 3d printer

Leave a Reply

Your email address will not be published. Required fields are marked *


*